Closed-type milk cooler АТ «Rodnik»

Closed-type milk cooler АТ «Rodnik»

Closed-type milk cooler АТ «Rodnik»: cools milk from its first drops

The unit is intended for cooling milk on livestock farms and at milk plants.

Closed-type milk cooler АТ «Rodnik»

One-piece design: all units are supplied and operated as a monobloc (on one frame).
Easy operation: does not require special skills and staff training.
Cost-efficiency: minimal effort during installation on site.
Speed: when setting up on site, you only need to connect electricity, cold water – and everything works!
Mobility: may be temporarily removed to the field.
Versatility: suitable for all types of robots.

Rapid cooling

Closed-type milk cooler АТ «Rodnik»

3
-year
warranty

Closed-type milk cooler АТ «Rodnik»

Comparative characteristics of benefits

Closed-type milk cooler АТ «Rodnik»
Built-in pump for loading and discharge. Already in the kit and at one base.
Closed-type milk cooler АТ «Rodnik»
Complete with two rotary washing heads.
Closed-type milk cooler АТ «Rodnik»
Voltage monitor. Already in the kit and at one base. Protection of expensive electrical equipment from failure.

Starts cooling milk from firsts drops

Increased heat transfer area

Higher cooling rate

Reduces cooling time by 20% compared to directly cooled tanks

Replaces pre-cooling function

Two-stage cooling system

Gentle cooling

Wide adjustment range, cooling milk to +2°C. without increasing cooling time

Closed-type milk cooler АТ «Rodnik»
Touch panel. Already in the kit and at one base. Management and visualization of all operating modes.

Closed-type milk cooler АТ «Rodnik»
Built-in water heater. Already in the kit and at one base.

On one frame. Already in the kit and at one base. Compact model. The unit supplies cold water and electricity and ensures proper cooling and storage of milk.
Antishock. Already in the kit and at one base. Easy and smooth transfer to the field, works at an ambient temperature from 0 to +45°C

Technical specifications

(basic set)

  VALUE FOR MATERIAL CONTROL
Name, unit of measurement 2000 3000 4000 5000 6000 8000 10000
Maximum capacity, L 2000 3000 4000 5000 6000 8000 10000
Minimum milk filling for cooling, L 500 600 760 760 910 980 1100
Stirrer: Rpm / Electric motor power, kW 18/0,25
Refrigerant Freon R404A — weight, kg. 6 8 10 12 14 16 18
Total power consumption (cooling), not more than, kW 4,9 5,6 6,8 7,2 9,8 10 11
Tank dimensions, mm L/W/H 2420 / 1600 / 2050 3040 / 1600 / 2050 3620 / 1600 / 2050 3400 / 1800 / 2250 3850 / 1800 / 2250 4890 / 1800 / 2200 25200 / 2200 / 2600
Unit weight, not more than, kg 520 620 740 860 950 1250 1300