Equipment for dairy plants — LLC AgroTech

Open-type milk cooler АТ «Rodnik»

iBrain — Wed, 29 May 2019 11:34:36 +0000

Open-type milk cooler АТ «Rodnik»

The unit is intended for cooling milk on livestock farms and at milk plants.

Mobility:
may be temporarily removed to the field

Easy to operate:
does not require special skills and staff training

Cost-efficiency:
minimal effort during installation on site

One-piece design:
all units are supplied and operated as a monobloc (on one frame)

Speed:
when setting up on site, you only need to connect electricity, cold water – and everything works!

Rapid cooling

-year
warranty

Comparative characteristics of benefits

Starts cooling milk from firsts drops

Increases the heat transfer area

Higher cooling rate

Replaces pre-cooling function

Two-stage cooling system

Gentle cooling

Reduces cooling time by 20% compared to directly cooled tanks

Wide adjustment range, cooling milk to +2°C. without increasing cooling time

Voltage monitor

Already included on one base. Protection of expensive electrical equipment from failure.

Sealed cap

silicone food pad.

Complete with

two rotary washing heads

Antishock. Already in the kit and at one base

Easy and smooth transfer to the field, works at an ambient temperature from 0 to +45°C

Technical specifications

Basic set

	VALUE FOR MATERIAL CONTROL
Name, unit of measurement		500	1000	1500	2000	2500
Minimum milk filling for cooling, L / Maximum capacity, L		0 / 535	0 / 1000	0 / 1550	0 / 2100	0 / 2700
Milk cooling time of milk (hours) at 1/3 of the load, from the initial temperature of 32°C to the final temperature of 4°C, at an ambient temperature of 25±1°C, hours	3,0
Refrigerator oil — type, weight, kg.	Indicated on the compressor label
Accuracy with which the unit automatically maintains the milk storage temperature, °C	±1
Stirrer: angular rate, rpm / electric motor power, kW / power voltage, V	18 / 0,25 / 380
Refrigerant Freon R404A — weight, kg.		3,0	5,0	5,5	6,0	6,5
Power voltage (50 Hz, 3 phases), V	380
Total power consumption, not more than, kW		3,5	3,5	5,0	5,0	5,0
Unit dimensions, mm L/W/H		2760 / 1100 / 1300	2880 / 1540 / 1250	3080 / 1770 / 1460	3480 / 2000 / 1320	3480 / 2110 / 1480
Unit weight, not more than, kg		430	540	620	700	750

Closed-type milk cooler АТ «Rodnik»

iBrain — Wed, 29 May 2019 07:52:23 +0000

Closed-type milk cooler АТ «Rodnik»: cools milk from its first drops

The unit is intended for cooling milk on livestock farms and at milk plants.

One-piece design: all units are supplied and operated as a monobloc (on one frame).

Easy operation: does not require special skills and staff training.

Cost-efficiency: minimal effort during installation on site.

Speed: when setting up on site, you only need to connect electricity, cold water – and everything works!

Mobility: may be temporarily removed to the field.

Versatility: suitable for all types of robots.

Rapid cooling

3
-year
warranty

Comparative characteristics of benefits

Built-in pump for loading and discharge. Already in the kit and at one base.

Complete with two rotary washing heads.

Voltage monitor. Already in the kit and at one base. Protection of expensive electrical equipment from failure.

Starts cooling milk from firsts drops

Increased heat transfer area

Higher cooling rate

Reduces cooling time by 20% compared to directly cooled tanks

Replaces pre-cooling function

Two-stage cooling system

Gentle cooling

Wide adjustment range, cooling milk to +2°C. without increasing cooling time

Touch panel. Already in the kit and at one base. Management and visualization of all operating modes.

Built-in water heater. Already in the kit and at one base.

On one frame. Already in the kit and at one base. Compact model. The unit supplies cold water and electricity and ensures proper cooling and storage of milk.

Antishock. Already in the kit and at one base. Easy and smooth transfer to the field, works at an ambient temperature from 0 to +45°C

Technical specifications

(basic set)

	VALUE FOR MATERIAL CONTROL
Name, unit of measurement	2000	3000	4000	5000	6000	8000	10000
Maximum capacity, L	2000	3000	4000	5000	6000	8000	10000
Minimum milk filling for cooling, L	500	600	760	760	910	980	1100
Stirrer: Rpm / Electric motor power, kW	18/0,25
Refrigerant Freon R404A — weight, kg.	6	8	10	12	14	16	18
Total power consumption (cooling), not more than, kW	4,9	5,6	6,8	7,2	9,8	10	11
Tank dimensions, mm L/W/H	2420 / 1600 / 2050	3040 / 1600 / 2050	3620 / 1600 / 2050	3400 / 1800 / 2250	3850 / 1800 / 2250	4890 / 1800 / 2200	25200 / 2200 / 2600
Unit weight, not more than, kg	520	620	740	860	950	1250	1300

Open-type milk cooler АТ «Istok»

iBrain — Tue, 28 May 2019 13:36:42 +0000

Open-type milk cooler АТ «Istok»

The unit is intended for cooling milk on livestock farms and at milk plants

One-piece design: all units are supplied and operated as a monobloc (on one frame)
Easy operation: does not require special skills and staff training.
Cost-efficiency: minimal effort during installation on site.
Speed: when setting up on site, you only need to connect electricity, cold water – and everything works!
Mobility: may be temporarily removed to the field

3 -year warranty

Comparative characteristics of benefits

Voltage monitor. Already in the kit and at one base. Protection of expensive electrical equipment from failure.

Complete with two rotary washing heads

Product sensor. Already in the kit and at one base. Automatic Stop Discharge function

Sealed cover, silicone food gasket.

Antishock. Already in the kit and at one base. Easy and smooth transfer to the field, works at an ambient temperature from 0 to +45°C

Technical specifications

	VALUE FOR MATERIAL CONTROL
Name, unit of measurement	100	300	500	800	1000	1500	2000	2500
Maximum capacity, L / Minimum milk filling for cooling, L	110/30	320/50	535/50	860/150	1000/150	1550/200	2100/250	2700/250
Milk cooling time of milk (hours) at 1/3 of the load, from the initial temperature of 32°C to the final temperature of 4°C, at an ambient temperature of 25°C, hours	3,0
Refrigerator oil — type, weight, kg.	Indicated on the compressor label
Accuracy with which the unit automatically maintains the milk storage temperature, °C	+/-1
Stirrer Angular rate, rpm / Electric motor power, kW / Power voltage, V	23/0,25/380
Refrigerant Freon R404A — weight, kg.	2,0	2,3	3,0	3,8	5,0	5,5	6,0	6,5
Power voltage (50 Hz, 3 phases), V	380
Total power consumption (cooling), not more than, kW	2,5	3,1	3,8	4,5	4,5	5,0	5,2	5,2
Tank dimensions, mm, L/W/H	1500 / 810 / 900	2260 / 1110 / 980	2260 / 1100 / 1300	2380 / 1540 / 1180	2380 / 1540 / 1250	2580 / 1770 / 1460	2980 / 2000 / 1320	2980 / 2110 / 1480
Unit weight, not more than, kg	180	240	280	360	390	470	550	600

Closed-type milk cooler АТ «Istok»

iBrain — Tue, 28 May 2019 11:29:17 +0000

Closed-type milk cooler АТ «Istok»

Economical, practical, mobile

Comparative characteristics of benefits

Built-in water heater. Already in the kit and at one base.

Built-in pump for loading and discharge. Already in the kit and at one base.

Product sensor. Already in the kit and at one base + Automatic function Stop Discharge.

Voltage monitor. Already in the kit and at one base. Protection of expensive electrical equipment from failure.

Complete with two rotary washing heads

Touch panel. Already in the kit and at one base. Management and visualization of all operating modes.

Antishock. Already in the kit and at one base. Easy and smooth transfer to the field, works at an ambient temperature from 0 to +45°C.

On one frame. Already in the kit and at one base. Compact model. The unit supplies cold water and electricity and ensures proper cooling and storage of milk.

AT «Istok» is intended for cooling milk on livestock farms and at milk plants.

One-piece design: all units are supplied and operated as a monobloc (on one frame)
Easy operation: does not require special skills and staff training.
Cost-efficiency: minimal effort during installation on site
Speed: when setting up on site, you only need to connect electricity, cold water – and everything works!
Mobility: may be temporarily removed to the field
Versatility: suitable for all types of robots

	Value for material control
Name, unit of measurement	2000	3000	4000	5000	6000	8000	10000
Maximum capacity, L	2000	3000	4000	5000	6000	8000	10000
Minimum milk filling for cooling, L	500	600	760	760	910	980	1100
Stirrer:
rpm	18
Electric motor power, kW	0,25
Refrigerant Freon R404A — weight, kg	6	8	10	12	14	16	18
Общая Total power consumption (cooling), not more than, kW	4,9	5,6	6,8	7,2	9,8	10	11
Tank dimensions, mm:
Length	2420	3040	3620	3400	3850	4890	25200
Width	1600	1600	1600	1800	1800	1800	2200
Height	2050	2050	2050	2250	2250	2200	2600
Unit weight, not more than, kg	520	620	740	860	950	1250	1300

SMART Vat Pasteurizer (VDP)

iBrain — Tue, 28 May 2019 08:00:16 +0000

Features of SMART Vat Pasteurizer (VDP)

Accepts raw milk;
Cools milk to 4°C;
Stores raw milk;
Pasteurizes raw milk;
Matures the milk;
Cools pasteurized milk to 4°C;
Stores pasteurized milk;
Dispatches pasteurized milk;
Sets and adjusts temperature modes for technological processes;

Automatically flushes reservoirs;
Mixes products;
Adjusts the rate of mixing products;
Removable stirrers, depending on the product;
Sustains constant temperature of the product;
Yields depending on the product (040,050, 0100);
Combined heating (electricity, steam);
Execution of preset formulations.

SMART Vat Pasteurizer produces

Ayran

Pasteurized milk

Soft cheeses

Matzoon

Fermented milk products (kefir, ryazhenka, prostokvasha, varenets, etc.);

Cheddar-type cheeses

Cottage cheese

Yougurts

Semi-hard cheeses

Pasteurization, cooling, maturing, and ripening of cream for sour cream production

Pasteurization, cooling, and ripening of cream for butter production

Pasteurization of substandard milk for feeding calves

The equipment supersedes

Pump – 1 pce (50% economy);

Piping manifold (taps, couplings, fittings, fasteners) (90% economy);

Electric cables (90% economy);

Control panels with automated tools (35% economy);

Pipeline washing (60% economy);

Running water consumption (80% economy);

Manual labor (70% economy);

Milk loss (95% reduction);

Operation space (70% economy);

Time (50% economy).

Heating

Formulation for specific products

Cooling

Dispatching work through remote access

Flushing

Setting up of a local network at the enterprise

Water supply and discharge

Stirrer operation

Technical specifications of SMART Vat Pasteurizer

Basic set

	VAT TYPE
Name of parameters	VDPU 0,2	VDPU 0,6	VDPU 1,0
Working capacity, L	200	600	1000
Installed average cooling capacity, kW	4	10	14
Stirrer rotation rate, adjustable, rpm	2-14
Refrigerant	R-404A
Product heating time up to 65°С, no more than, h	3	3	3
Number of heating elements, pcs.	3	3	4
Heating elements power, kW	9	9	9
Heating elements installed power, kW	27	27	36
Unit dimensions: LWH	264512801210	298017101210	197017101550
Unit weight, not more than, kg	500	700	740